1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-32
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
1.
Press [Additional Functions].
2.
Press
[
] or [
] to select <TX/RX SETTINGS>,
then press [OK].
3.
Confirm that <TX/RX COMMON SET.> is selected,
then press [OK].
4.
Press
[
] or [
] to select <TX SETTINGS>,
then press [OK].
5.
Press
[
] or [
] to select <SEND SETTINGS>,
then press [OK].
6.
Press
[
] or [
] to select <TX FILE NAME>,
then press [OK].
7.
Use the numeric keys to enter the document’s
name (up to 24 characters), then press [OK].
8.
Press
[
] or [
] to select <SUBJECT>, then
press [OK].
9.
Use the numeric keys to enter the subject (up to
40 characters), then press [OK].
10.
Press [
] or [
] to select <MESSAGE TEXT>,
then press [OK].
11.
Use the numeric keys to enter the message body
text (up to 140 characters), then press [OK].
12.
Confirm that <REPLY-TO> is displayed, then
press [OK].
13.
Use the numeric keys to enter the reply-to
address (up to 120 characters), then press [OK].
14.
Press [
] or [
] to select <E-MAIL PRIORITY>,
then press [OK].
15.
Press [
] or [
] to select the priority
(<NORMAL>, <LOW> or <HIGH>), then press
[OK].
16.
Press [Stop/Reset] to return to the standby
mode.
