1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
6-9
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
7.
Press
[
] or [
] to select <COMMUNITY
NAME 1>, then press [OK].
8.
Use the numeric keys to enter the desired
community name other than “public,” then press
[OK].
If you do not need to specify <COMMUNITY NAME 2>, skip to step
11.
9.
Press
[
] or [
] to select <COMMUNITY
NAME 2>, then press [OK].
10.
Use the numeric keys to enter the desired
community name, then press [OK].
11.
Press [
] or [
] to select <SNMP WRITABLE
1>, then press [OK].
12.
Press [
] or [
] to select <ON>, then press
[OK].
If you do not need to specify <SNMP WRITABLE 2>, skip to step 15.
13.
Press [
] or [
] to select <SNMP WRITABLE
2>, then press [OK].
14.
Press [
] or [
] to select <ON>, then press
[OK].
15.
Press [Stop/Reset] to return to the standby
mode.
16.
Restart the machine.
Dedicated Port
To set or browse detailed information on the machine with a Canon
printer driver or utility, set <DEDICATED PORT> to <ON>.
If you want to use a Canon printer driver or utility, select <ON> for both
<USE SNMP> and <DEDICATED PORT>.
You can restrict the IP addresses of computers on which items can be set
or browsed. If you restrict the IP addresses, it is not possible to use the
Remote UI to set or browse detailed information on computers other
than those whose IP addresses are allowed, even if both <USE SNMP>
and <DEDICATED PORT> are <ON>. For details, see “IP Address Range
Settings,” on p. 6-39.
–
–
