1
2
3
4
5
6
7
8
9
10
11
Back
Previous
Next
TOP
11-17
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
TX/RX SETTINGS
4. RX SETTINGS
Sets the reception features.
1. ECM RX
Sets whether the ECM (Error Correction Mode) reception is activated.
ON
OFF
–
–
2. FAX/TEL OPT. SET
Sets the optional items in the <FaxTel> mode. (See “FaxTel: Optional Settings,” on p. 4-38.)
1. RING START TIME
Sets the time the machine takes to check whether a call is a fax or a voice call. (0SEC–30SEC)
2. F/T RING TIME
Selects the ring length for voice calls. (15SEC–300SEC)
3. F/T SWITCH ACTION
Selects whether the machine switches to the receive mode after the ring time has elapsed, or
whether if disconnects the call.
RECEIVE
DISCONNECT
–
–
3. INCOMING RING
Sets whether the optional handset or the external telephone rings when the machine receives a
fax. This function is only available when the <RX MODE> is set to <FaxOnly> or <FaxTel>.
ON
The optional handset or the telephone rings when the machine receives a fax if an external
telephone is connected.
RING COUNT
Sets the number of incoming rings before the machine answers. (1TIMES–99TIMES)
OFF
The optional handset or the telephone does not ring when the machine receives a fax. (In the
Sleep mode, the telephone may ring one or two times.)
