1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-14
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
4.
Press
[
] or [
] to select a one-touch key (01
to 07) or coded dial code (000 to 191) for which
you want to register the address, then press
[OK].
You can also select a one-touch key or coded dial code by pressing
the corresponding one-touch key, or [Coded Dial] followed by the
desired three-digit code.
5.
Press
[
] or [
] to select <SMB>, then press
[OK].
6.
Press
[
] or [
] to select <HOST NAME>,
then press [OK].
7.
Use the numeric keys to enter the name of the
file server on the network (up to 120 characters),
then press [OK].
H O S T N A M E : 1
c a n o n 0 1
Ex.
8.
Press
[
] or [
] to select <NAME>, then press
[OK].
9.
Use the numeric keys to enter the destination’s
name (up to 16 characters), then press [OK].
10.
Press [
] or [
] to select <FILE PATH>, then
press [OK].
11.
Use the numeric keys to specify the folder to
which the job is to be sent (up to 120characters),
then press [OK].
12.
Press [
] or [
] to select <LOGIN NAME>,
then press [OK].
13.
Use the numeric keys to enter the login name,
then press [OK].
You can enter up to 24 characters for the login name.
14.
Press [
] or [
] to select <PASSWORD>, then
press [OK].
15.
Use the numeric keys to enter the password,
then press [OK].
You can enter up to 14 characters.
To register another one-touch key or coded dial code, repeat the
procedure from step 4.
16.
Press [Stop/Reset] to return to the standby
mode.
