Error Messages
98
Troubleshooting
This camera cannot print B/W
Insert memory card to print
• Black and white printing is not possible when a camera is connected (except when
(PictBridge) is displayed on the LCD monitor of the camera). Insert a memory
card to print.
Cartridge has been changed
• The cartridge was changed for a cartridge of a different size after the print menu
was displayed. Insert a cartridge of the same size or change the print settings.
Cartridge has been changed
Trim Setting Adjusted
• If the cartridge is changed after the trimming setting have been made, the printer
automatically sets the trimming frame again to fit the paper size.
Cartridge not compatible
• Use a cartridge that is compatible with this printer.
Communication error
• Turn the printer, camera and computer power off, then turn on again.
• Check the Printing Images When Connected with Camera section (p. 53). If the
error message continues to display, contact a Canon Customer Support center for
assistance.
Disconnected
• Make sure that the printer and the sender are in appropriate distance.
• Check the sender's power supply.
Print output tray is full
• Remove accumulated paper from the print receptacle.
Cartridge incorrectly inserted or not loaded
• Load the cartridge.
• Remove the cartridge and insert the cartridge all the way, then close the cartridge
cover.