3-4
3.
Login Screen
The login screen appears at the startup when the scanner is turned ON.
❏
Login Screen Types
There are two types of login screen: a list type login screen
for selecting from a list of registered users, and a key in
type login screen for entering a user name and password.
List Type Login Screen
Key in Type Login Screen
Hint
• Set the type of login screen from [Device Operation] of the
Web menu (refer to p. 4-25 on the
ScanFront 220/220P
INSTRUCTIONS
) or [Login type setting] in the administrator
settings of the ScanFront (refer to p. 3-10 on the
ScanFront
220/220P INSTRUCTIONS
).
• Fingerprint authentication is enabled when you are using the
ScanFront 220P. (See “Fingerprint Authentication (Only
Available with the ScanFront 220P)” on p. 3-7.)
❏
When Using Server Authentication
The login screen when you use server authentication is a
key in type, and a list box is displayed for selecting Device
Authentication and Server Authentication.
IMPORTANT
• When you use server authentication to log in, you are
registered as a new user of server authentication. However,
your e-mail address is not registered in the user information.
You must contact the ScanFront administrator in order to
register your e-mail address.
• Fingerprint authentication cannot be used with server
authentication.
Summary of Contents for 220P - imageFORMULA ScanFront
