Photos
56
Erasing a Photo Right After Recording It
You can erase the still image recorded
last while reviewing it within the time set
for the [REVIEW] option or immediately
after recording it, if [REVIEW] is set to
[
OFF].
While reviewing the image immediately
after recording:
1
Push the joystick (
) toward
.
2
Select (
) [ERASE] and press
.
Viewing Photos
1
Set the mode dial to
.
2
Turn on the camcorder.
3
Push the joystick (
) to move
between images.
Push the joystick (
) and hold it
down to run quickly through the still
images.
Image Jump Function
When you have recorded a large
number of still images, you can jump 10
or 100 still images at a time.
1
Press
to display the joystick
guide.
(
Basic Playback
(
CO
PY
