background image

46

Settings and Activity Reports

„

TX SETTINGS

„

RX SETTINGS

ACTIVITY REPORT

Enable/disable automatic printing of the ACTIVITY REPORT. –

AUTO PRINT

When you set ON, your fax is set to print the ACTIVITY 
REPORT for every 20 transactions (sending and receiving).

ON/OFF

TX/RX SEPARATE

Divide the activity management report into sent and received 
transactions.

ON/OFF

Name

Description

Settings

ECM TX

Enable/disable error correction during transmission.

ON/OFF

PAUSE TIME

Set the length of the pause you insert into a dialing sequence. 1 to 9 seconds

AUTO REDIAL

Determine whether the fax will redial a number if it fails to get 
a response on the first attempt.

ON/OFF

REDIAL TIMES

Set the number of retries.

1 to 10 times

REDIAL INTERVAL

Set the period of time between redialing attempts.

2 to 99 minutes

DIAL TONE DETECT

Set whether to send faxes after detecting the dial tone. This 
function may not work correctly with some telephone lines.

ON/OFF

Name

Description

Settings

ECM RX

Enable/disable error correction during reception.

ON/OFF

FAX/TEL AUTO SW

This feature is used to answer calls, and if no fax tone is 
detected, the fax rings to alert you of an incoming call.

RING START TIME

Set the duration that the fax listens for a fax tone before 
starting to ring.

0 to 20 seconds

TEL RING TIME

Set the length of time the fax will ring to alert you of an 
incoming call.

10 to 45 seconds

DEFAULT ACTION

Select the action taken after the TEL RING TIME expires.

DISCONNECT/
RECEIVE

INCOMING RING

Set the fax to ring when it receives a call.

ON/OFF

RING COUNT

Set the number of incoming rings before the fax answers.

2 to 30 times

MAN/AUTO SWITCH

Determine if the fax switches to document receive mode after 
the fax rings for a specified time when the fax is in the manual 
receive mode.

ON/OFF

RING TIME

Set the amount of time the fax will ring before switching to 
document receive mode.

1 to 60 seconds

REMOTE RX

Enable/disable remote receiving.

ON/OFF

REMOTE RX ID

If you set REMOTE RX to ON, you can select the remote 
receiving ID.

00 to 99

SAVE RX IMAGE

Set whether to save images received.

ON/OFF

OPTION SETTINGS

Set whether the fax prints out received documents even 
when the ink level is low. Faxes will be deleted from memory 
after printing. If there is no ink left, the information contained 
in the fax will be lost.
This setting will be retained even if the FINE cartridge is 
replaced with a new cartridge.

ON/OFF

DRPD:SELECT FAX

If you select DRPD as the receive mode, select the ring 
pattern for the fax.

DOUBLE RING/
SHORT-SHORT-LONG/
SHORT-LONG-
SHORT/
OTHER RING TYPE/
NORMAL RING

Name

Description

Settings

Summary of Contents for 3303B002























































































Reviews: