Photos
• 53
Erasing a Photo Right After Recording It
You can erase the still image recorded
last while reviewing it within the time set
for the [REVIEW] option (or immediately
after recording it, if [REVIEW] is set to
[
OFF]).
While reviewing the still image
immediately after recording:
1
Push the joystick (
) toward
.
2
Select (
) [ERASE] and press
.
Basic Playback
Viewing Photos
1
Move the
/
switch to
(still
images).
2
Turn the
switch to ON, then
turn it toward MODE and release it
to set the camcorder in PLAY
mode.
The green PLAY indicator will turn on.
3
Push the joystick (
) to move
between still images.
Push the joystick (
) and hold it
down to run quickly through the still
images.
Image Jump Function
When you have recorded a large number
of still images, you can jump 10 or 100
images at a time.
(
Basic Playback
(
