98
Video
To capture the photos
1 Play back the scene from which you want to capture the photo.
2 Pause the playback at the point you want to capture.
3 Press
j
fully.
To capture a photo sequence, hold
j
pressed down. The scene
will be played back by frames and each frame captured as a separate
photo.
4 Touch [
B
] to return to the index screen.
IMPORTANT
• When capturing photos on an Eye-Fi card, photos will be uploaded
automatically if you are within the range of a configured network. Always
verify that Eye-Fi cards have been approved in the country/region of
use. See also
Using an Eye-Fi card
(
0
NOTES
• The data code of the photos will reflect the date and time of recording of
the original scene.
• Photos captured from a scene with a lot of fast movement may be
blurred.
•
Photos will be recorded on the memory selected for
recording photos.
• [
B
Photo Sequence]:
- Up to 100 photos can be captured at a time.
- The photo sequence capture will stop when the end of the scene is
reached (playback will pause at the beginning of the following scene).
- Photos will be captured at intervals of 1/30 second (1/24 second, if
the scene was recorded at a frame rate of [
E
PF24]).
Dividing Scenes
You can divide scenes (original scenes only) in order to leave out the
best parts and later cut out the rest.
1 Open the [Original] index screen.
Operating modes:
Summary of Contents for 4353B001
Page 1: ...PUB DIE 0367 000 HD Camcorder Instruction Manual Y ...
Page 11: ...11 ...
