150
Additional Information
Indicators and Onscreen Displays
light
s
u
p in red.
- Battery pack is exhausted. Replace or charge the battery pack.
light
s
u
p in red.
- A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory
card. Initialize the memory card if the display does not change back to normal.
- The memory card is full. Replace the memory card or delete some recordings (
free some space on the memory card.
Even after
s
topping recording, the ACCESS indicator doe
s
not go off.
- The scene is being recorded in the memory. This is not a malfunction.
The red ON/OFF (CHG) indicator fla
s
he
s
rapidly (
one fla
s
h at 0.5-
s
econd
interval
s
).
-
C
harging has stopped because the compact power adapter or the battery pack is faulty.
C
on-
sult a
C
anon Service
C
enter.
The red ON/OFF (CHG) indicator fla
s
he
s
(
two fla
s
he
s
at 1-
s
econd
interval
s
)
- The remaining charge of the battery pack is at least 50% of a full charge. This is not a mal-
function.
The red ON/OFF (CHG) indicator fla
s
he
s
very
s
lowly (
one fla
s
h at 2-
s
econd interval
s
).
- The temperature of the battery pack is outside the charging range. If the battery pack’s tem-
perature is below 0 °
C
(32 °F), warm it before charging it; if it is above 40 °
C
(104 °F), let the
battery pack cool down before charging it.
-
C
harge the battery pack in temperatures between 0 °
C
and 40 °
C
(32 °F and 104 °F).
- The battery pack is damaged. Use a different battery pack.
appear
s
on the
s
creen.
- The LO
C
K switch on the Eye-Fi card is set to prevent accidental erasure.
C
hange the position
of the LO
C
K switch.
- Data could not be read from the Eye-Fi card. Turn off the camcorder and turn it on again. If the
problem persists, it may indicate a problem with the Eye-Fi card.
C
ontact the card manufac-
turer’s customer care.
Picture and Sound
The
s
creen appear
s
too dark.
- The L
C
D screen was dimmed. Hold
pressed for 2 seconds to restore the L
C
D screen
to its previous brightness setting.
DISP.
CO
PY