Canon 4462B005 Instruction Manual Download

Page: 127 / 260

127

Shooting Movies

You can manually set the shutter speed, aperture, and ISO speed for
movie shooting. Using manual exposure to shoot movies is for
advanced users.

Set the Mode Dial to <

The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.

Select [Movie exposure].

Under the [

] tab, select [

Movie

exposure

], then press <

Select [Manual].

Select [

Manual

], then press <

Set the shutter speed and
aperture.

To set the shutter speed, turn the
<

> dial. The settable shutter

speeds depend on the frame rate
<

•

: 1/4000 sec. - 1/60 sec.

•

: 1/4000 sec. - 1/30 sec.

To set the aperture, hold down the
<

> button and turn the <

> dial.

Set the ISO speed.

Press the <

> button and use

either <

> or <

> key to select

the ISO speed.

• Auto ISO setting: ISO 100 - 6400
• Manual ISO setting: ISO 100 - 6400

Manual Exposure Shooting

> + <

COP

Summary of Contents for 4462B005





































































































































































































































































Search results

Summary of Contents for 4462B005

Reviews:

Related manuals for 4462B005

Brands by name

Popular brands

Canon 4462B005, Instruction Manual

Search results

Summary of Contents for 4462B005

Reviews:

Related manuals for 4462B005

Brands by name

Popular brands