Canon 4462B005 Instruction Manual Download

Page: 198 / 260

198

Under the My Menu tab, you can register up to six menu options and
Custom Functions whose settings you change frequently.

Select [My Menu settings].

Under the [

] tab, select [

My Menu

settings

], then press <

Select [Register to My Menu].

Select [

Register to My Menu

], then

press <

Register the desired items.

Select the item to be registered, then
press <

On the confirmation dialog, select
[

] and press <

> to register the

item.

You can register up to six items in My
Menu.

To return to the screen in step 2,
press the <

> button.

Sort

You can change the order of the registered items in My Menu. Select
[

Sort

] and select the item whose order you want to change. Then

press <

>. With [

] displayed, press the <

> key to change

the order, then press <

Delete item/items and Delete all items

You can delete any of the registered items. [

Delete item/items

]

deletes one item at a time, and [

Delete all items

] deletes all items.

Display from My Menu

When [

Enable

] is set, the [

] tab will be displayed first when you

display the menu screen.

Registering My Menu

About My Menu settings

COP

Summary of Contents for 4462B005





































































































































































































































































Search results

Summary of Contents for 4462B005

Reviews:

Related manuals for 4462B005

Brands by name

Popular brands

Canon 4462B005, Instruction Manual

Search results

Summary of Contents for 4462B005

Reviews:

Related manuals for 4462B005

Brands by name

Popular brands