Positioning Items
9
English
Positioning Items
Items can be scanned in three different ways: scanning standard items, scanning oversize items, and
scanning on the stand. The following procedures explain how to position items for each method.
Scanning Standard Items
Follow the procedure below to scan photos and other items smaller than the document glass.
1
Open the document cover.
The document cover will open as far as the position
shown to the right and stop.
2
Place an item on the document glass and
adjust its top corner with the alignment
mark.
3
Gently close the document cover.
• When opening the document cover, support it with your hand until it stops.
• Do not place items that weigh 2.0 kg or more on the scanner. In addition, do not
press heavily on the document cover or the item while it is on the scanner.
• You can position items, such as magazines and books, up
to approximately 24 mm thick on the scanner.
Alignment Mark
Top
Bottom
