22
Load a fully charged Battery Pack LP-E12 into the camera. The card (sold
separately) can be an SD, SDHC, or SDXC memory card. SDHC and SDXC
cards with UHS-I can also be used. The captured images are recorded onto
the card.
Make sure the card’s write-protect switch is set upward to enable
writing/erasing.
1
Open the cover.
Slide the lever as shown by the arrows
and open the cover.
2
Insert the battery.
The battery’s “
Canon
” logo must be
toward the camera’s front side as you
insert the battery with the battery
contacts in first.
Insert the battery until it clicks and locks
in place.
3
Insert the card.
The card’s label side must be toward
the front of the camera.
Insert it straight down until it stops.
Installing and Removing the Battery and Card
Installing the Battery and Card
Write-protect switch
COP
Y
Summary of Contents for 6609B074
Page 1: ...E Basic Instruction Manual COPY ...
Page 80: ...COPY ...