Printing Maintenance
41
1
Ensure that the printer is on.
2
Open the Printer Utility dialog box.
(1)
Select Page Setup… in the File menu.
(2)
Click Utilities to open the Printer Utility dialog box.
3
Start Print Head Deep Cleaning.
(3)
Select the ink nozzles to be cleaned, and then click OK.
All colors:
All nozzels
Black 3eBK:
Black ink nozzels
Color 6C, 6M, 6Y:
Color ink nozzels
(4)
When the confirmation message is displayed, click OK.
Important
The process takes about one minute to complete, so simply
wait until the POWER lamp stops flashing.
Note
After print head deep cleaning finishes, print the nozzle check pattern
to verify that the print head nozzles are clean.
See
"Printing the Nozzle Check Pattern"
on page 34.
If not, check that there are sufficient ink levels in all ink tanks before
turning off printer. Be sure to perform another print head deep cleaning
24 hours after turning off printer.
If this does not solve the problem, the print head may be worn out.
Contact the Customer Care Center.
(1)
Select Cleaning
from the pull-
down menu.
(2)
Click Deep
Cleaning.
i560_QSG_US.book Page 41 Tuesday, May 6, 2003 1:43 PM