background image

M-29

W

orking with Images in File V

iewer Utility

3

M

Processing RAW Images

Adjusting the White Balance

You can adjust the white balance in your RAW images.
You can adjust the white balance by selecting a setting in the [White Balance] list box. You can
also make fine adjustments to the white balance by using the Click white balance function,
which allows you to adjust the white balance by selecting a white area in the image.

Select the White Balance

Select the desired setting from the [White Balance] list box.

The table below shows the 9
available white balance settings.

\

The selected setting is applied to
the image.

White Balance

Shot Settings

Auto

Daylight

Shade

Cloudy

Tungsten

Fluorescent

Flash

Color Temp

Details

To apply the white balance setting used when the
shot was taken.

File Viewer Utility automatically sets the white
balance.

For sunny daylight outdoors.

For shaded areas outdoors.

For cloudy or hazy days and during sunset.

For tungsten (light bulb) light.

For fluorescent light.

When flash is used.

You can manually set color temperature for 2800
to 10000K (in 100K increments). (M-30)

Color temp./K (Kelvin)

Approx. 3000 to 7000

Approx. 5200

Approx. 7000

Approx. 6000

Approx. 3200

Approx. 4000

Approx. 6000

Approx. 2800 to 10000

Summary of Contents for 8861A003 - EOS Digital Rebel Camera SLR























































































































































































Reviews: