5
5
5-10
5-10
Installation > Adjustment
Installation > Adjustment
7) Set the Size Plate in accordance with the size being set. (Lump the Size Plates not in use
together and store them at the rear.)
8) Close the cover from which the Size Plate is pushed in, and install the cassette.
9) Set the Cassette 4 in the same way.
NOTE:
Paper size settings are automatically recognized.
F-5-27
Adjustment
NOTE:
The second side of the 2-sided copy mentioned later means the second side in the
image formation order.
With this equipment, the second side in the image formation order at the time of 2-sided
copy/print is equivalent to the first side of the original.
■
Margin Adjustment (First side; Mechanical Adjsutment)
1) Make copies using the Cassette 3 and 4, and check that the left edge margin is 2.5±1.5mm.
Feed direction
of paper
L1
image
<In Case of Nonstandard>
NOTE:
Adjsutment method is same for both the Cassette 3 and 4.
2) Pull out the cassette.
3) Check the 2 scale positions on the adjusting plates.
F-5-28
F-5-29
Summary of Contents for AD2
Page 4: ...Safety Precautions Notes Before it Works Serving ...
Page 6: ...1 1 Specifications Specifications Specifications Names of Parts ...
Page 8: ...2 2 Technology Technology Basic Configuration Pickup Feed System JAM Detection Power supply ...
Page 26: ...4 4 Maintenance Maintenance Periodical maintenance Adjustment Parts Configuration Role ...
