d) Switching on the power
Make sure the lock switch is not locked and then press the
POWER
button to switch
on the power. When the printer is powered up, it carries out the initial operation,
then moves the carriage to the cartridge replacing position (center of the printer).
The
POWER
indicator blinks to show that the printer is on standby with a BJ
cartridge installed. Switch on the power for the equipment in this order: computer,
other peripheral equipment, printer.
e) Installing the BJ cartridge
Two types of cartridges can be installed in the printer: black BJ cartridge (BC-10)
and color BJ cartridge (BC-11e). The BJ cartridge BC-11 may be used however it
cannot print small dots.
1) Removing the cap from the print head of the BJ cartridge
Remove the BJ cartridge from the cartridge pack, then remove the orange head cap
and tape protecting the nozzles as shown in the figure below.
Do not reuse a head cap and tape that have been removed once. If they
are reused, the head may be clogged with foreign matter, or colors of ink
may be mixed.
Peel off the tape protecting the nozzles without touching the print head.
Poor printing may be caused by scratches on the printhead or any foreign
object adhered to it.
After removing the cap and the tape, do not shake the BJ cartridge. Ink
could splatter out if you do.
3-5
BJC-50
Part 3: Operating Instructions
Cartridge Pack
Black BJ Cartridge
Color BJ Cartridge
Cartridge Pack
Orange Head Cap
Tape
Figure 3-6 Removing the Head Cap and the Tape
Summary of Contents for BJC-55 Series
