background image

Canon

 

 Booklet Maker Service Support Guide 

B.  Canon USA Support Offerings 

The following support mechanisms were established to deliver high quality, 
timely technical support  services, and product information to the   
Booklet Maker  dealerships. These support services cover areas such as 
system and user software, networking and connectivity issues, electro-
mechanical operations, and other hardware servicing. 

1.  Canon USA Technical Support Center 

Canon USA provides a time sensitive call escalation process for all 
authorized  Booklet Maker dealers. The TSC is the single point of 
entry for this process. Hours of Operation for live nationwide toll free 
support are Monday – Friday 9:00am to 6:00pm Eastern Time. Once a call 
is placed to the TSC and information is logged into the call management 
system, a case number will be assigned to the call.  Every effort is made to 
resolve the problem during the call. Calls to the TSC that cannot be 
resolved during the initial call and require escalation will follow the process 
in 

Table 21 below

. The status of all escalated cases can be viewed via the 

e-Support Center Web Site

 or by calling the TSC.  

Canon USA’s TSC support responsibilities are as follows: 

  All technical support for the end-user is provided solely by the contracted 

servicing Dealer.   

  The  Canon USA TSC will be the central contact/escalation for the 

reporting of all known outstanding hardware and software issues to 
Canon USA’s engineering and development groups. 

  The Canon USA TSC will be available to all authorized  dealers, and 

technicians who have successfully completed the Training Program. 

  The TSC will provide technical information regarding all Canon 

associated hardware and software products. 

  The TSC will deploy, as required through proper escalation procedures, 

all on-site Canon USA Digital  Solutions  Specialist and Systems 
Engineers. 

 

 

 Booklet Maker Service Support Guide 

March 2015 

Revision 1 

Page 19 

Summary of Contents for BLM 550+































Reviews:

Related manuals for BLM 550+