7
7
7-24
7-24
Installation > Installation Procedure > Connecting Cable
Installation > Installation Procedure > Connecting Cable
Connecting Cable
NOTE:
This item is also variably connected to other option machine, but as an example, in this
case, it is connected to the Host machine.
1) Rotate the terminal connector at the back of the Host machine in the direction of the arrow
to remove.
Terminal Connector
NOTE:
Trailing edge connector is not used in the Integration Unit.
F-7-62
2) Connect the ARKNET Cable to the terminal at the back of the Host machine, and then
rotate the knob in the direction of the arrow to fix.
Knob
ARCNET Cable
Terminal
CAUTION:
Be sure to turn the knob of the ARCNET Cable all the way to connect otherwise it can
cause unstable electrical contact.
3) Connect the terminal connector and the ARKNET Cable to the coaxial connector, and turn
their knobs in the direction of the arrows as shown in the figure to secure.
Terminal Connector
Coaxial Connector
ARCNET Cable
x2
F-7-63
F-7-64
Summary of Contents for Booklet Finisher-D1
