Canon BR-E1, Instruction Manual

Connecting the Remote Controller and Camera

10



Pairing with two or more cameras simultaneously is not possible. If 
you pair a camera and the remote controller that has already been 
paired with another camera, remote operation of the previously 
paired camera cannot be performed. Remove the registration of the 
remote controller, then pair with the other camera.



If you cannot select [

Pairing

] from the menu screen of the camera to 

pair, the camera may be paired with another remote controller. Remove 
the registration of the remote controller, then pair with the camera.



You cannot pair multiple remote controllers to one camera. When pairing 
a camera that has already been paired with a remote controller with 
another remote controller, remove the registration of the remote 
controller (by operating the camera), then pair with the other remote 
controller.



Pairing and remote operations cannot be performed when the camera is 
connected to a computer or GPS receiver, etc. with an interface cable. 
Perform pairing and remote operations after disconnecting the cable.



Pairing is not removed even when the camera is turned off. Remote 
operations can be performed again when the camera is turned on.



Remote operations cannot be performed when the camera is connected 
via Wi-Fi. Remote operations can be performed again when the Wi-Fi 
connection is terminated.