13
1
Set up the camera for remote
control shooting.
Set the camera for movie shooting.
Set [
Remote control
] to [
Enable
]
from the menu screen of the camera.
2
Set the switch to <
>.
Set the release timing/movie shooting
switch on the remote controller to the
< > position.
3
Shoot the movie.
When you press the release button
on the remote controller, the indicator
lamp lights up and movie shooting
starts.
When you press the button again, the
indicator lamp blinks and movie
shooting stops.
Shooting Movies
Depending on the camera, the setup method for remote control shooting
may differ. Refer to the Instruction Manual for your camera.
The operation sounds of the remote controller may be recorded.
The camera can also be focused by pressing the <
AF
> button on the remote
controller.
