9
Connect the remote controller and camera using the Bluetooth function.
To connect the remote controller and camera via Bluetooth, first you
need to pair the camera and remote controller (registering the device to
the camera).
1
Set the camera to the pairing
standby mode.
Select [
Pairing
] from the menu
screen of the camera. For details,
refer to the pages regarding BR-E1 in
the Camera Instruction Manual.
2
Connect the remote controller to
the camera.
Press and hold the <W> button and
<T> button on the remote
controller simultaneously for three
seconds or more.
The indicator lamp blinks, and pairing
starts.
The indicator lamp lights up when
pairing is complete. The remote
controller is registered in the camera
and a message is displayed on the
LCD monitor.
If pairing fails, the lamp blinks rapidly.
In such a case, press and hold the
<
W
> button and <
T
> button again.
Connecting the Remote Controller and Camera
