Specifications
17
English
Specifications
*1
16 bit output supports only for film scanning.
*2
USB 2.0 Hi-Speed mode on Windows PC. Transfer time to computer is not included.
*3
Calibration processing time is not included.
*4
Note that Macintosh computer with USB 2.0 Hi-Speed interface expansion card is not supported.
*5
Type of AC adapter depends on the area where the scanner is purchased.
• Specifications are subject to change without notice.
CanoScan 5200F
Scanner Type
Flatbed
Scanning Element
CCD 6-line color
Light Source
Cold cathode fluorescent lamp
Optical Resolution
2400 x 4800 dpi
Selectable Resolution
25 - 9600 dpi
Scanning Bit Depth
Color
16 bit input / 16 bit or 8 bit output for each color (RGB)
Grayscale
16 bit input / 16 bit or 8 bit output
*1
Scanning Speed
*2
(Photo or Document)
Color
7.125 msec./line (1200 dpi), 8.25 msec./line (2400 dpi)
Grayscale, B&W
7.125 msec./line (1200 dpi), 8.25 msec./line (2400 dpi)
Scanning Speed
*2
(Film) Color, GrayScale, B&W
8.25 - 123.75 msec./line
Preview Speed
*3
Approximately 5 sec.
Interface
USB 2.0 Hi-Speed
*4
,
USB (USB 1.1 equivalent)
Maximum Document Size
A4/Letter: 216 x 297 mm
Film Type/Number of Frames
35 mm strip (negative/positive)/6 frames
35 mm slide (negative/positive)/4 frames
Scanner Buttons
4 buttons: COPY, SCAN, PDF, E-MAIL
Operating Range
Temperature
10
°
C to 35
°
C (50
°
F to 95
°
F)
Humidity
10% to 90% RH, 20% to 80% RH when scanning film
(without condensation formation)
Power Requirements
AC adapter (100/120/230/240V)
*5
Power Consumption
In operation: 13.5 watts maximum, Stand-by: 4 watts
Power Switch Off: 1.7 watts (Using supplied AC adapter)
Maximum Exterior Dimensions
285 x 512 x 112 mm
Weight
Approximately 4.1 kg
• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall
ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the
CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows
XP with these programs still installed. After upgrading to Windows XP, reinstall
ScanGear CS and CanoScan Toolbox according to the steps on page 4. For details, please
read the “Troubleshooting” section of the
Scanning Guide
(HTML format manual).
