Connect the Scanner
7
English
Connect the Scanner
1
Attach the FAU cable to the FAU connector on the back of the scanner (
c
).
2
Connect the scanner to the computer with the supplied USB interface cable (
d
).
3
Attach the supplied AC adapter to the scanner.
4
Press ( I ) to turn the power on.
• Make sure that the scanning unit is unlocked. (P. 6)
• Only use the USB interface cable and the AC adapter provided with the scanner. Use of
other cables or adapters may lead to a malfunction.
• When the scanner is connected to the USB 1.1 port on Windows XP, do not worry if the
"HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub" message appears. You can
operate the scanner in this condition without problems.
USB Interface Cable
Wide Flat Connector
Small Square Connector
USB Connector
AC Adapter