72
Problems with the Automatic Document Feeder (ADF-S9)
Documents Are Not Scanning
Cause 1:
ADF power not on
Solution:
Ensure that the ADF option cable is correctly connected to the AC adapter and
that the power cord is plugged into a functioning electrical outlet.
Cause 2:
ADF connector cable not attached
Solution:
Connect the ADF connector cable to the option cable as specified.
Cause 3:
[Document Feeder] not selected in ScanGear CS-S or [Automatic Document
Feeder] not selected in Plug-in Module CS-S
Solution:
Select [Document Feeder] in ScanGear CS-S or [Automatic Document Feeder] in
Plug-in Module CS-S.
Cause 4:
Document(s) incorrectly placed in ADF
Solution:
Reposition the document(s) correctly.
Cause 5:
ADF cover not closed properly
Solution:
Close the ADF cover completely.
Cause 6:
Paper jam
Solution:
Frequent Misfeeds
Cause 1:
Paper dust accumulated on separator or separator damaged
Solution:
Clean the separator.
*FB1200S_PG60-83.v.1.P
4/23/99, 2:52 PM
72
