FB1200S Getting Started
15
Confirming the Status of the SCSI Card with Windows NT 4.0
After you have installed the SCSI card and driver, use the
procedures below to ensure that they are operating correctly.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
1
Turn on the computer.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
2
Click the Windows [Start] button on the taskbar and
select [Settings] and [Control Panel].
• The Control Panel will display.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
3
Double-click the [SCSI Adapter] icon.
• The SCSI card is operating correctly if [aic78xx] displays in the
SCSI Adapter window.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
4
Click
at the top right of each window to close it.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
5
Turn off the computer.
• If “aic78xx” does not display in the SCSI Adapter window,
install the SCSI driver with the following procedures.
1 Double-click the [SCSI Adapter] icon in the Control Panel.
2 Click the [Driver] tab.
3 Click the [Add] button.
4 Click the [Use Disk] button.
5 Place the supplied CanoScan Setup Utility CD-ROM in
the drive.
6 Select the folder containing the SCSI driver and follow
the instructions in the window to install it.
•
If the above procedures are followed to install the SCSI
driver, “Adaptec AVA-290XE PCI SCSI Controller (NT 4.0)”
should display in the SCSI Adapter window.
This concludes the procedures for installing the SCSI driver.
Proceed now to Connecting to the Computer.
Macintosh
Windows
WARNING