FB1200S Getting Started
31
Macintosh
Windows
•
NOTE
•
• Calibration enables the scanner to reproduce colors more
closely aligned to the original tones. It teaches your scanner
the correct white balance from which to calculate the other
colors.
• Calibration will automatically be performed each time a
preview or final scan is initiated.
• When the scanner is used in low ambient temperatures, it may
take a few moments for the unit to settle after the lamp
lights.
When the calibration process completes, the preview scan will initiate,
gradually presenting the image in the preview window.
The image that appears in the window is merely a preview
image. The preview image is generally used to adjust the
scan parameters, such as the area to be scanned, the
magnification and the brightness. The actual scan is
performed at a later stage. For the purpose of the test scan,
however, we will proceed directly to the final scan.
•
NOTE
•
• A trial scan of a document is called a preview. As a default
setting, a preview scan is normally started as soon as the
ScanGear CS-S window launch completes. This can be turned
off in the Preferences tab. For more information, refer to the
ScanGear CS-S Users Guide.
