15
• Set up the scanner within the reach of the cable.
• Do not place the scanner in areas with large fluctuations in temperature or humidity.
Also do not move the equipment rapidly between areas with high and low humidity.
Condensation may cause image errors. After moving from a high humidity area to a low
humidity area, allow the scanner sufficient time to adapt to the new condition before
use.
• Do not place the equipment in an area subject to direct sunlight. The humidity may rise
inside the equipment and cause damage, or the image quality may decrease. If you have
to use it in direct sunlight, block the light with a thick curtain.
• When the scanner is used in low ambient temperatures, it may take a few moment for
the unit to settle after the lamp lights.
• Locations to Avoid
Uneven or stepped surfaces
High temperature environments
