Connect the Scanner
6
Connect the Scanner
1
Peel the caution seals from the scanner.
2
Connect the scanner to the computer with the supplied USB interface cable.
Using the Scanner in the Upright Position
Installing the Stand Removing
the
Stand
Positioning an item
• Make sure that the scanning unit is unlocked. (P.5)
• Only use the USB interface cable provided with the scanner. Use of other cables may
lead to a malfunction.
• The scanner does not have a power switch. The power is activated as soon as the
computer is turned on.
USB Interface Cable
Wide Flat Connector
Small Square Connector
Press the hook.