manualshive.com logo in svg

Canon CiRC2550, Service Manual

The Service Manual for the Canon CiRC2550 is available for free download at 88.208.23.73:8080. This comprehensive manual provides detailed instructions and valuable insights to assist you in operating and maintaining your Canon CiRC2550 product efficiently. Access your user manual today, ensuring hassle-free navigation through your device's features and functionality.

Share
Download
background image

Chapter 14  

14-6

A-5) Slide in the cassette 1.
A-6) Make a copy using the cassette 1 as the source of paper; then, check
to see that the margin in the image front direction is 2.5 +/-1.5 mm.
A-7) Mount back the grip (front right).

B. Making Adjustments to the Cassette 2 

B-1) Loosen the fixing screw [2] of the adjusting plate [1].
B-2) By referring to the index you took note of in step 5), move the
adjusting plate back and forth. Moving it toward the rear of the machine
will increase the margin on the image front side.

F-14-16

B-3) Tighten the fixing screw.
B-4) Slide back the cassette 2.
B-5) Make a copy using the cassette 2 as the source of paper; then, check
to see that the margin in the image front direction is 2.5 +/-1.5 mm.

3) Mount back the machine's cassette front right cover.
4) Close the cassette lower right cover and the cassette upper right cover.

2. Adjusting the Margin (2nd side)

1) Make a copy using the cassette 1 as the source of paper; then, check to

make sure that the margin on the front side is 2.5 +/-2.0 mm.

F-14-17

2) If the margin is as indicated, change the adjustment value of the horizontal

registration for the 2nd side for the cassette 1.
- COPIER > ADJUST > FEED-ADJ > ADJ-C1RE 
An increase by '1' will decrease the margin on the front side by 0.1 mm.

3) Enter the adjustment value for the horizontal registration of the 2nd side

for the cassette 1 as the adjustment value for the horizontal registration of
the 2nd side of the cassette 2.
- COPIER > ADJUST > FEED-ADJ > ADJ-C2RE

4) Make a copy using the cassette 2 as the source of paper; then, check to

make sure that the margin on the front side is 2.5 +/-2.0 mm.

5) If the value is not as indicated, change the adjustment value of the 2nd side

for the cassette 2.
- COPIER > ADJUST > FEED-ADJ > ADJ-C2RE
An increase by '1' (for DJ-C2RE) will decrease the horizontal registration
on the front side by 0.1 mm.

6) Record the new values on the service label.

- ADJ-C1RE
- ADJ-C2RE

7) Press the Reset key twice to end service mode.

14.6.2 Adjust the Horizontal Registration for the Manual 

Feed Tray

0014-3126

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /

Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080i / iR
C2550

1. Adjusting the Margin for the Manual Feed Tray (1st side; mechanical

adjustment)

1) Place paper in the manual feed tray. For instructions, see the label attached

to the manual feed tray.

2) Make a copy using the manual feed tray as the source of paper; then, check

to make sure that the margin on the front side is 2.5 +/-1.5 mm.

F-14-18

- If the value is not as indicated, make the following adjustments:
3) Remove the paper from the manual feed tray.
4) In case the MP side guide plate stopper [1] is attached, slide the knob [2]

in the direction of the arrow and unlock the stopper. 

F-14-19

5) Loosen the 2 fixing screws [1] on the manual feed tray upper cover.
6) With reference to the value you took note of in step 2), move the manual

feed upper cover [2] back and forth. Moving it toward the rear of the ma-
chine will increase the margin on the front side.

F-14-20

7) Tighten the fixing screw of the manual feed tray upper cover.
8) Place paper in the manual feed tray.
9) Make a copy; then, check to make sure that the margin on the image front

side is 2.5 +/-1.5 mm.

2. Adjusting the Margin (manual feed tray; 2nd side)

1) Make a double-sided copy using the manual feed tray as the source of pa-

per; then, check to make sure that the margin on the front side for the 2nd
side is 2.5 +/-2.0 mm.

0
2

4

6

8
10

(–)

(+)

2.5±2.0mm

0
2

4

6

8
10

(–)

(+)

2.5±1.5mm

[2]

[1]

[1]

[2]

Summary of Contents for CiRC2550







































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CiRC2550

Oki IP-6620 Maintenance Manual preview
IP-6620
Brand: Oki Pages: 572
Oki proColor pro900DP User Manual preview
proColor pro900DP
Brand: Oki Pages: 127
Olivetti d-color MF551 Printing Manual preview
d-color MF551
Brand: Olivetti Pages: 309
OKIDATA MICROLINE 320 Quick Reference Manual preview
MICROLINE 320
Brand: OKIDATA Pages: 4
Tally T8106 Operation Manual preview
T8106
Brand: Tally Pages: 53
Tally T2265 SprintPro Operator'S Manual preview
T2265 SprintPro
Brand: Tally Pages: 30
Tally T2040 Maintenance Manual preview
T2040
Brand: Tally Pages: 108
TallyGenicom 9045N Datasheet preview
9045N
Brand: TallyGenicom Pages: 2
TallyGenicom 2900 - Datasheet preview
2900 -
Brand: TallyGenicom Pages: 2
Ricoh Aficio SP4100N-KP Specifications preview
Aficio SP4100N-KP
Brand: Ricoh Pages: 4
IDStation fastID User Manual preview
fastID
Brand: IDStation Pages: 18
Olympus PS100 - Photo Printer - 50 Sheets Quick Start Manual preview
PS100 - Photo Printer - 50 Sheets
Brand: Olympus Pages: 2
Olivetti d-COLOR MF3300 Utility Keys preview
d-COLOR MF3300
Brand: Olivetti Pages: 69
Oki C9800hdn Manual De Instalação Do Software preview
C9800hdn
Brand: Oki Pages: 20
Xerox iGen3 Brochure preview
iGen3
Brand: Xerox Pages: 8
Unisys UDS2265+ Operator'S Manual preview
UDS2265+
Brand: Unisys Pages: 144
Oki MPS4200mb Basic User Manual preview
MPS4200mb
Brand: Oki Pages: 181
Nexa PX-700IV Setup preview
PX-700IV
Brand: Nexa Pages: 2

Brands by name

Popular brands

Load more brands