manualshive.com logo in svg

Canon CiRC2550, Service Manual

The Service Manual for the Canon CiRC2550 is available for free download at 88.208.23.73:8080. This comprehensive manual provides detailed instructions and valuable insights to assist you in operating and maintaining your Canon CiRC2550 product efficiently. Access your user manual today, ensuring hassle-free navigation through your device's features and functionality.

Share
Download
background image

Chapter 17

17-37

FSLUT-M2

Partial ratio adjustment for M-color images in the main scanning direction: 2
Correction value for the second block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M3

Partial ratio adjustment for M-color images in the main scanning direction: 3
Correction value for the third block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M4

Partial ratio adjustment for M-color images in the main scanning direction: 4
Correction value for the fourth block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M5

Partial ratio adjustment for M-color images in the main scanning direction: 5
Correction value for the fifth block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M6

Partial ratio adjustment for M-color images in the main scanning direction: 6
Correction value for the sixth block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M7

Partial ratio adjustment for M-color images in the main scanning direction: 7
Correction value for the seventh block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M8

Partial ratio adjustment for M-color images in the main scanning direction: 8
Correction value for the eighth block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-C1

Partial ratio adjustment for C-color images in the main scanning direction: 1
Correction value for the first block of partial ratio correction C
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-C2

Partial ratio adjustment for C-color images in the main scanning direction: 2
Correction value for the second block of partial ratio correction C
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-C3

Partial ratio adjustment for C-color images in the main scanning direction: 3
Correction value for the third block of partial ratio correction C
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-C4

Partial ratio adjustment for C-color images in the main scanning direction: 4
Correction value for the fourth block of partial ratio correction C
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-C5

Partial ratio adjustment for C-color images in the main scanning direction: 5
Correction value for the fifth block of partial ratio correction C
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-C6

Partial ratio adjustment for C-color images in the main scanning direction: 6
Correction value for the sixth block of partial ratio correction C
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-C7

Partial ratio adjustment for C-color images in the main scanning direction: 7
Correction value for the seventh block of partial ratio correction C
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-C8

Partial ratio adjustment for C-color images in the main scanning direction: 8
Correction value for the eighth block of partial ratio correction C
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-K1

Partial ratio adjustment for Bk-color images in the main scanning direction: 1
Correction value for the first block of partial ratio correction K
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

COPIER>ADJUST>LASER

Sub item

Description

level.

Summary of Contents for CiRC2550







































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CiRC2550

Xerox D125 User Manual preview
D125
Brand: Xerox Pages: 310
Xerox 4450 Forms Creation Manual preview
4450
Brand: Xerox Pages: 108
Radio Shack TRS-80 Operation Manual preview
TRS-80
Brand: Radio Shack Pages: 57
Keeler Vantage Plus Instructions Manual preview
Vantage Plus
Brand: Keeler Pages: 25
Oki C3300n Specifications preview
C3300n
Brand: Oki Pages: 1
Canon imageRUNNER 5075 Reference Manual preview
imageRUNNER 5075
Brand: Canon Pages: 502
Cannon imageRUNNER 5075 Support Manual preview
imageRUNNER 5075
Brand: Cannon Pages: 268
Microplex SOLID T11 DT Operator'S Manual preview
SOLID T11 DT
Brand: Microplex Pages: 135
Ricoh PRO C7200S Operator'S Manual preview
PRO C7200S
Brand: Ricoh Pages: 552
Intellisystem ThermalTronix TT-1025EX-MIL User Manual preview
ThermalTronix TT-1025EX-MIL
Brand: Intellisystem Pages: 11
Xante ColourLaser 21 Series Setup Manual preview
ColourLaser 21 Series
Brand: Xante Pages: 32
Konica Minolta BIZHUB C3351 Quick Start Manual preview
BIZHUB C3351
Brand: Konica Minolta Pages: 102
SEWOO SLK-TE20 Series User Manual preview
SLK-TE20 Series
Brand: SEWOO Pages: 31
Oki ES3032a4 User Manual preview
ES3032a4
Brand: Oki Pages: 72
Oki ML3310e Setup Manual preview
ML3310e
Brand: Oki Pages: 23
Rego RG-MTP58B User Manual preview
RG-MTP58B
Brand: Rego Pages: 28
Sanyo DVP-P1 Service Manual preview
DVP-P1
Brand: Sanyo Pages: 20
Sanyo DVP-P1 Technical Information preview
DVP-P1
Brand: Sanyo Pages: 30

Brands by name

Popular brands

Load more brands