manualshive.com logo in svg

Canon CiRC2550, Service Manual

The Service Manual for the Canon CiRC2550 is available for free download at 88.208.23.73:8080. This comprehensive manual provides detailed instructions and valuable insights to assist you in operating and maintaining your Canon CiRC2550 product efficiently. Access your user manual today, ensuring hassle-free navigation through your device's features and functionality.

Share
Download
background image

Chapter 17

17-49

13. CST-ADJ

T-17-37

14. MISC

T-17-38

ADJ-DKRE

Image write position adjustment in main scanning direction of second side of the sheets when first side of sheets for two-
sided copying in the paper deck is fed (side registration adjustment)
Adjustment method
- When the value is incremented by 1, the image moves by 0.1 mm to the right.
- Input the value given on the service label when the RAM on the DC controller circuit board has been cleared or when 
the DC controller circuit board has been replaced.
Adjustment range: -100 to 100 (in 0.1 mm increments)
[Factory setting/value after clearing RAM: 0]

1

ADJ-MFRE

Image write position adjustment in main scanning direction of second side of the sheets when first side of sheets for two-
sided copying in the multi-feeder is fed  (side registration adjustment)
Adjustment method
- When the value is incremented by 1, the image moves by 0.1 mm to the right.
- Input the value given on the service label when the RAM on the DC controller circuit board has been cleared or when 
the DC controller circuit board has been replaced.
Adjustment range: -100 to 100 (in 0.1 mm increments)
[Factory setting/value after clearing RAM: 0]

1

REG-SPD

Make a fine adjustment of the registration motor speed at constant speed.
Change the registration speed at constant speed in the range of + or - 10 scales against the default value.
Setting range
-10 to 10
[Factory setting/value after clearing RAM: 0]

2

COPIER>ADJUST>CST-ADJ

Sub item

Description

level.

MF-A4R

Used to enter the basic value for the manual feed tray's paper width (A4R).
Adjustment method
- If you have cleared the DC controller PCB's RAM or replaced the DC controller PCB, enter the value on the service 
label.
- When replacing the paper width detection VR or registering a new value, perform the following service mode: 
FUNCTION>CST.
Adjustment range  0 to 255 [Factory default/After RAM clear: 141]

1

MF-A6R

Used to enter the basic value for the manual feed tray's paper width (A6R).
Adjustment method
- If you have cleared the DC controller PCB's RAM or replaced the DC controller PCB, enter the value on the service 
label.
- When replacing the paper width detection VR or registering a new value, perform the following service mode: 
FUNCTION>CST.
Adjustment range  0 to 255 [Factory default/After RAM clear: 235]

1

MF-A4

Used to enter the basic value for the manual feed tray's paper width (A4).
Adjustment method
- If you have cleared the DC controller PCB'sRAM or replaced the DC controller PCB, enter the value on the service 
label.
- When replacing the paper width detection VR or registering a new value, perform the following service mode: 
FUNCTION>CST.
Adjustment range  0 to 255 [Factory default/After RAM clear: 26]

1

COPIER>ADJUST>MISC

Sub item

Description

level.

SEG-ADJ

Used to adjust the text and photo separation level for text/photo/map mode.
Adjustment method
- To make documents more easily recognized as photo documents, increase the setting value.
- To make documents more easily recognized as text documents, decrease the setting value.
Adjustment range -4to 4 (Value at time of factory shipment/value after RAM clear: 0) 

1

K-ADJ

Used to adjust the black recognition level during black text processing.
Adjustment method
- To make text more easily recognized as black, increase the setting value.
Adjustment range -3to 3 (Value at time of factory shipment/value after RAM clear: 0) 

1

ACS-ADJ

Used to adjust the color recognition level during ACS mode.
Adjustment method
To make documents more easily recognized as black and white documents, increase the setting value.
- To make documents more easily recognized as color documents, decrease the setting value.
Adjustment range -3to 3 (Value at time of factory shipment/value after RAM clear: 0) 

1

ACS-EN

- ACS-EN (Used to adjust ACS recognition zone.)
Increasing the setting value expands the recognition zone.

2

COPIER>ADJUST>FEED-ADJ

Sub item

Description

level.

Summary of Contents for CiRC2550







































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CiRC2550

Xerox 3270 Programmer'S Manual preview
3270
Brand: Xerox Pages: 34
Canon BJC-S530D Quick Start Manual preview
BJC-S530D
Brand: Canon Pages: 96
Canon BJC-S500 Setup Instructions preview
BJC-S500
Brand: Canon Pages: 2
Canon BJC-S300 Setup Instructions preview
BJC-S300
Brand: Canon Pages: 2
Canon BJC-80 Specification preview
BJC-80
Brand: Canon Pages: 2
Canon BJC-6000 Series Setup Instructions preview
BJC-6000 Series
Brand: Canon Pages: 10
Canon BJC-55 Series Specification preview
BJC-55 Series
Brand: Canon Pages: 2
Canon BJC-5100 Series Technical Information preview
BJC-5100 Series
Brand: Canon Pages: 2
Canon BJC-50 Parts Catalog preview
BJC-50
Brand: Canon Pages: 4
Canon BJC-4400 Series Quick Start Manual preview
BJC-4400 Series
Brand: Canon Pages: 15
Canon BJC-3000 Series Quick Start Manual preview
BJC-3000 Series
Brand: Canon Pages: 8
Canon BJC-3000 Series Technical Information preview
BJC-3000 Series
Brand: Canon Pages: 2
Canon BJC-2100 Series Quick Start Manual preview
BJC-2100 Series
Brand: Canon Pages: 9
Canon BJC S600 Setup Instructions preview
BJC S600
Brand: Canon Pages: 11
Canon BJC-2100 Series Simplified Manual preview
BJC-2100 Series
Brand: Canon Pages: 9
Canon BJC-55 Series Service Manual preview
BJC-55 Series
Brand: Canon Pages: 206
Canon 900D - i Color Inkjet Printer Printing Manual preview
900D - i Color Inkjet Printer
Brand: Canon Pages: 30
Canon 8996A001 - i 455 Color Inkjet Printer Printing Manual preview
8996A001 - i 455 Color Inkjet Printer
Brand: Canon Pages: 4

Brands by name

Popular brands

Load more brands