Chapter 17
17-63
FIX-ROT
Threshold value setting of sub-thermistor temperature at which to end the racing after small size sheets have passed
through
This sets the large size job start temperature following the small size supporting fan-cooling. It improves the hot offset
or down time.
Settings
-2 to 2
[Factory setting/value after clearing RAM: 0]
1
FX-S-TMP
ITOP temperature regulation offset adjustment
Adjustment of ITOP temperature for regular paper (64 to 105g paper) uniform speed
This reduces the unevenness in the gloss that appears for 94 mm at the leading edges of the sheets at the regular paper
uniform speed.
Settings
[Factory setting/value after clearing RAM: 0]
1
PAP-W-EN
Density unevenness reduction mode during solid image output
This deals with cases where the left edges of solid images are darker or screw marks appear. Uneven density is reduced
by providing more space between the sheets so that the time during which the screw is rotated increases. Increase the
value when uneven density in the solid images becomes problematic. The time between sheets is increased by an amount
equivalent to the number of seconds set.
Setting
0 to 10 seconds
[Factory setting/value after clearing RAM: 0]
1
TMP-TBL2
Fixing temperature regulation temperature offset (thick paper)
Temperature adjustment of the temperature regulation for thick paper (106 to 163g paper)
This improves the hot offset or fixability of the thick paper (106 to 163g paper).
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
1
TMP-TBL3
Fixing temperature regulation temperature offset (super-thick paper)
Temperature adjustment of the temperature regulation for super-thick paper (164 to 220g paper)
This improves the hot offset or fixability of the super-thick paper (164 to 220g paper).
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
1
TMP-TBL5
Fixing temperature regulation temperature offset (4C thin paper)
Temperature adjustment of the temperature regulation for color thin paper
This improves the hot offset or fixability of color thin paper.
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
1
TMP-TBL6
Fixing temperature regulation temperature offset (envelopes)
Temperature adjustment of the temperature regulation for envelopes
This improves the hot offset or fixability at the envelopes
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
1
TMP-TBL7
Fixing temperature regulation temperature offset (special fixing mode)
Temperature adjustment of the temperature regulation for special fixing mode
This improves the hot offset or fixability in case of the special fixing mode
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
1
FXS-TMP2
ITOP temperature offset (thick paper)
Temperature adjustment of ITOP for thick paper (106 to 163g paper)
This reduces the unevenness of the gloss that appears for 94 mm at the leading edges of the thick sheets (106 to 163g
paper).
Settings
-2: -10 deg C
-1: -5 deg C
0: 0 deg C
+1: 5 deg C
+2: +10 deg C
[Factory setting/value after clearing RAM: 0]
1
COPIER>OPTION>BODY
Sub item
Description
level.
Summary of Contents for CiRC2550
