Chapter 2
2-11
F-2-26
16) Put the process unit back to the host machine.
17) Turn the handle of the process unit by 180 degrees counterclockwise.
18) Press the lever [1] and set back the release lever.
F-2-27
19) Fix the process unit in place with 2 screws that were removed in the step
5) to attach the handle cover.
20) Close the lower right cover of the host machine.
2.2.4 Installation of the Toner Retainer
0013-8254
Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550
1) Take out the toner retainer Bk [1] from the protection package and shake
it 10 to 12 times from side to side.
F-2-28
2) Set the toner retainer Bk [1] to the host machine, and turn the lever [2] in
the direction of the arrow to lock.
F-2-29
3) Set the rest of the toner retainers in the same way.
- As for the ITB unit, be sure to close it by pressing the 2 sealed areas [2] of
the ITB cover simultaneously. If the unit is not closed appropriately, it may
cause the color displacement and light image.
- If you press the areas other than the sealing areas to close the ITB unit, the
ITB cover may make contact with the ITB.
- Make sure to release the tip-resistant arm [1] first, and then, close the ITB
unit. If you try to close the ITB unit while the tip-resistant arm is fixed, it
may cause damage of the tip-resistant arm.
- If pushing the seal areas of the ITB cover one side by one, closing of the
ITB unit may be insufficient. Check if the push-button for opening/closing
[3] is returned.
[1]
[3]
[2]
[1]
Close the lower right cover of the host machine after fixing surely the
process unit. The position of the process unit may be displaced in closing
the lower right cover of the host machine first.
Be sure to shake the toner bottle 10 to 12 times. If the toner clogs up the
shutter area, either the message "set the toner container" or "E025" may be
indicated.
[1]
[2]
[1]
Summary of Contents for CiRC2550
