manualshive.com logo in svg

Canon CiRC2550, Service Manual

The Service Manual for the Canon CiRC2550 is available for free download at 88.208.23.73:8080. This comprehensive manual provides detailed instructions and valuable insights to assist you in operating and maintaining your Canon CiRC2550 product efficiently. Access your user manual today, ensuring hassle-free navigation through your device's features and functionality.

Share
Download
background image

Chapter 8  

8-48

8.11.11.2 Removing Cassette Paper Sensor 

0014-0698

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550

1) Remove the cassette paper sensor [2] from the sensor mounting plate. 

- 1 connector [1] 

F-8-76

8.11.12 Cassette Paper Level Sensor (A/B)

8.11.12.1 Before Removing Cassette Paper Level Sensor 

(A/B) 

0014-0705

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550

1) Detach the rear right cover. 

(page 10-16)

[Detaching the Rear Right Cov-

er]

2) Detach the right cover. 

(page 10-38)

[Opening/Detaching the Right Cov-

er]

3) Detach the right lower cover. 

(page 10-15)

[Detaching the Right Lower

Cover]

4) Remove the cassette pickup unit 2. 

(page 8-42)

[Removing the Cassette

Pickup Unit 2]

5) Remove the cassette pickup unit 1. 

(page 8-42)

[Removing the Cassette

Pickup Unit 1]

6) Remove the sensor mounting plate. 

(page 8-43)

[Removing the Sensor

Mounting Plate]

8.11.12.2 Removing Cassette Paper Level Sensor (A/B) 

0014-0706

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550

1) Remove the cassette paper level sensor (A/B) [2] from the sensor mount-

ing plate. 
- 1 connector each [1] 

F-8-77

8.11.13 Slide Resistor

8.11.13.1 Before Removing Slide Resistor

0014-1176

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550

1) Detach the rear right cover. 

(page 10-16)

[Detaching the Rear Right Cov-

er]

2) Open the right cover fully (to the point where it does not interfere with oth-

er parts). 

(page 10-38)

[Opening/Detaching the Right Cover]

3) Remove the manual feed unit. 

(page 8-50)

[Removing Manual Feed Unit]

4) Remove the manual feed tray unit. 

(page 8-50)

[Removing Manual Feed

Tray Unit]

8.11.13.2 Removing Slide Resistor 

0014-1178

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550

1) Detach the manual feed tray upper cover [2]. 

- 2 screws [1] 

MEMO:

It is better to put a mark to the side registration position before the removal. 

F-8-78

2) Remove the slide resistor [1]. 

- 1 connector [2] 

F-8-79

8.11.14 Cassette Pickup Solenoid

8.11.14.1 Before Removing Cassette Pickup Solenoid

0014-1183

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550

1) Detach the rear right cover. 

(page 10-16)

[Detaching the Rear Right Cov-

er]

2) Detach the right cover. 

(page 10-38)

[Opening/Detaching the Right Cov-

er]

3) Detach the right lower cover. 

(page 10-15)

[Detaching the Right Lower

Cover]

4) Remove the cassette pickup unit 2. 

(page 8-42)

[Removing the Cassette

Pickup Unit 2]

5) Remove the cassette pickup unit 1. 

(page 8-42)

[Removing the Cassette

Pickup Unit 1]

8.11.14.2 Removing Cassette Pickup Solenoid

0014-1188

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 /
Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR
C3080i / iR C2550

1) Remove the cassette pickup solenoid [1]. 

- 1 wire saddle [2]
- 1 connector [3] 
- 1 screw [4] 

Summary of Contents for CiRC2550







































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CiRC2550

Oki C910 Troubleshooting Manual preview
C910
Brand: Oki Pages: 33
Oki C910 Service Training preview
C910
Brand: Oki Pages: 52
Oki C910 Manual preview
C910
Brand: Oki Pages: 11
OKIDATA 120 Handbook preview
120
Brand: OKIDATA Pages: 58
Oki B2200 Setup Manual preview
B2200
Brand: Oki Pages: 24
VAF instruments 247 Technical Manual preview
247
Brand: VAF instruments Pages: 24
Wasp WPL305 Quick Start Manual preview
WPL305
Brand: Wasp Pages: 2
Xerox WorkCentre 6655i User Manual preview
WorkCentre 6655i
Brand: Xerox Pages: 282
3nStar PPT205 User Manual preview
PPT205
Brand: 3nStar Pages: 8
M&R Starlight A50 Manual preview
Starlight A50
Brand: M&R Pages: 36
Jolimark DP550 User Manual preview
DP550
Brand: Jolimark Pages: 64
DNP DS-ID400 Settings Manual preview
DS-ID400
Brand: DNP Pages: 10
Star Micronics SP500 Series Technical Manual preview
SP500 Series
Brand: Star Micronics Pages: 73
Panasonic DP-6030 Specifications preview
DP-6030
Brand: Panasonic Pages: 6
Panasonic Desktop Unit XX-XXXX Specification preview
Desktop Unit XX-XXXX
Brand: Panasonic Pages: 51
Panasonic DA-MC700 Operating Instructions Manual preview
DA-MC700
Brand: Panasonic Pages: 65
Panasonic DP-6530 Operating Instructions Manual preview
DP-6530
Brand: Panasonic Pages: 172
Panasonic DA-DU26C Operating Instructions Manual preview
DA-DU26C
Brand: Panasonic Pages: 166

Brands by name

Popular brands

Load more brands