5. Basic Photography
-31-
10
Focus on patient’s eye.
11
Start the timer.
Press the
TIMER/C
switch as soon as the fluorescein medium is injected. The buzzer sounds each
second, the lamp lights brightly and the elapsed time is displayed in the control software.
12
Take the image.
In a flare-free condition, check the focus again, and press the shutter release button.
To take images continuously, hold down the shutter release button. Images can be taken continuously
for up to 10 seconds at a rate of one frame per second.
13
Review the image.
14
Stop the timer.
Press the
TIMER/C
switch. The elapsed time display is reset.
15
End the study.
16
Lock the stage unit.
Press the stage unit lock button to lock the stage unit.
17
Turn off the power of the retinal camera.
