CHAPTER 2 STANDARDS AND ADJUSTMENTS
2-16
7
Attaching the Timing Belt for
the Multifeeder Assembly
Keep the rack plate [1] of the multifeeder
in closed state.
Move the slide volume [2] in the direction
of the arrow, and attach the timing belt [3] to
the pulley.
Figure 2-31
8
Adjusting the Position of the
Duplexing Unit Paper Jogging
Guide Sensor
1) Select A4R or LTRR, and perform
copying on the first side of a double-sided
copy.
2) Slide out the duplexing unit.
3) Measure the distance L of the paper
jogging guide plate [1].
A4R:
L = 210 ± 0.3 mm
LTRR: L = 216 ± 0.3 mm
4) If the distance is not as indicted, adjust the
position of the paper jogging guide
sensor.
Figure 2-32
9
Position of the Duplexing Unit
Stopper Plate Solenoid
1) Keep the steel core [1] of the solenoid
drawn to the copier.
2) Rotate the shutter [2], and keep the
distance as indicated, i.e., L1 is 1.0 ± 0.2
mm. Then, secure the stopper plate
solenoid.
Figure 2-33
[1]
[2]
[3]
[1]
[1]
[L]
[1]
[2]
[L1]
