61
Fax
Using the Machine for Fax Only
Set the fax receive mode to <
Auto
>.
1
Switch to the Fax mode (
→
p.15).
2
Press [
▲
] or [
▼
] to highlight <RX Mode>, and then press [OK].
3
Press [
▲
] or [
▼
] to highlight <Auto>, and then press [OK].
When a Fax or Call Comes In
When a fax comes in, the machine automatically begins receiving the fax. If a voice call
comes in, the caller will hear a fax tone.
Using the Machine for Faxing and Phoning
Set the fax receive mode to <
Fax/Tel Auto Switch
>.
1
Switch to the Fax mode (
→
p.15).
2
Press [
▲
] or [
▼
] to highlight <RX Mode>, and then press [OK].
3
Press [
▲
] or [
▼
] to highlight <Fax/Tel Auto Switch>, and then press [OK].
4
Specify ring settings.
<Ring Start
Time>
Specify how long the machine will attempt to detect a fax tone
before the machine starts ringing (5-30 seconds).
<Incoming
Ring Time>
Specify how long the machine will ring during an incoming call
(15-300 seconds).
<After Ring>
Specify how the machine should behave when an incoming call
is not answered:
•
<End>
: Disconnects the call.
•
<Receive>
: Receives a fax.
5
After you have specified the setting, press <Apply>.
Summary of Contents for Color imageCLASS MF8580Cdw
Page 38: ...38 38 Memo...
Page 72: ...72 72 Memo...
Page 92: ...92 92 Memo...
Page 119: ...119 119 Memo...
