Chapter 2
2-14
F-2-35
2.7.2 Checking Before Memory Expansion
0020-1946
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Enter service mode and output the spec report.
COPIER > FUNCTION > MISC-P > OUTPUT > SPEC
2) Check the memory capacity before installing the extension RAM with
'TOTAL MEMORY' of the spec report.
3) Exit service mode.
2.7.3 Turning OFF the Power of the Host Machine
0019-6883
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Turn OFF the main power.
2) Remove the power plug (for outlet).
2.7.4 Installation Procedure
0019-6885
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the cover plate [1] at the rear cover.
- 1 claw [2]
F-2-36
2) Remove the face plate [1].
- 1 screw [2]
F-2-37
3) In the case that the LED [1] at the main controller PCB is turned on, press
the SW3 [2] to turn off the LED [1].
F-2-38
4) Install the expansion RAM [2] on the DIMM stopper [1] on the main con-
troller PCB.
F-2-39
5) Install the face plate and the cover plate of the rear cover.
6) Insert the power plug into the power outlet.
7) Turn on the main power switch.
2.7.5 Checking After Memory Expansion
0020-1947
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Enter service mode and output the spec report.
COPIER > FUNCTION > MISC-P > OUTPUT > SPEC
2) Check that the memory capacity is increased after installing the extension
RAM with 'TOTAL MEMORY' of the spec report.
3) Exit service mode.
[1]
Expansion memory
1pc.
[1]
[2]
[1]
[1]
[2]
CAUTION:
Be sure to install the extension RAM after checking that the LED is turned
off.
When the LED is turned on, the backup battery works. If installing the
extension RAM with the LED turned on, the main controller PCB and the
extension RAM may be broken.
[1]
[2]
[1]
[2]
Summary of Contents for Color imageRUNNER C1022
