Chapter 2
2-6
F-2-14
2.2.5 Cassette Settings
0019-0668
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the cassette [1].
F-2-15
2) Pick the unlock lever [1] of the paper guide and adjust the paper guide [2]
to the required paper size.
F-2-16
3) Pick the paper guide unlock lever [1] and adjust the paper guide [2] to the
required paper size.
F-2-17
4) After loading the paper on the cassette, close the cassette.
2.2.6 Points to Note When Turning OFF Host Machine
0019-0653
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
2.2.7 Connecting Cables
0019-0650
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Connect the host machine's power plug into the outlet.
2) Turn ON the main power switch.
2.2.8 Auto Gradation Adjustment
0019-0673
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Open the feeder.
2) Clean the copyboard glass of the host machine.
3) Set A4 or LTR paper on the cassette. (Refer to the cassette settings.)
4) Close the feeder.
5) Specify the full adjustment in additional function mode.
[Additional Func] > [Adjustment/Cleaning] > [Auto Gradation
CAUTION:
Points to note when setting the paper
Make sure to remove the cassette when setting the paper.
[1]
[1]
[2]
[1]
NOTE:
Since this machine is not equipped with a hard disk, the main power can be
turned off without shutdown sequence.
CAUTION:
Make sure to set a test print correctly. If a test print cannot be read correctly,
the adjustments of gradation, density and color cannot be performed
appropriately.
[1]
[2]
[2]
[1]
Summary of Contents for Color imageRUNNER C1022
