3-47
Two-sided Mode
Copier Operator’s Manual/Basic Operations
Chapter 3 Making Copies Using the Basic Features
5
5
Place your original that will be copied on the
rear side of the output paper on the platen
glass, then press the
Start
key.
1 2 is displayed above the [TWO-SIDED] key.
NOTICE:
❍
Always place the original that will be copied on the rear side of the
output paper on the platen glass first. Failure to do so may result in
copies with the left and right reversed when making copies in the
Margin or Binding Erase mode.
MEMO:
●
When the number of originals is an odd number, insert a blank sheet
at the end of the document stack before making the copy.
6
6
Place your original that will be copied on the
front side of the output paper on the platen
glass, then press the
Start
key.
7
7
Repeat steps 5 and 6 for further copying.
▼
