4-44
Image Separation (Dividing the Original into Equal Sections and Copying Each Section on a Separate Sheet)
Chapter 4 Making Various Types of Copies
Copier Operator’s Manual/Basic Operations
4
4
Select the desired Image Separation setting,
then press the [OK] key.
The screen that appears in the touch panel display varies depending
on any optional accessories that are attached.
MEMO:
●
When performing image separation on two sides, press the [2-SIDED
COPY] key.
5
5
Select the layout of the last original, then press
the [OK] key.
◆
In 1 TO 2 and TWO-SIDED/1 TO 2 copy modes
MEMO:
●
When the original is placed vertically, each page is divided into upper
and lower sections. Press the [
] button when the image of the
last page of the original is on the upper half only.
◆
In 1 TO 4 and TWO-SIDED/1 TO 4 copy modes
MEMO:
●
This selection reduces the number of blank sheets.
●
When you place the original on the platen glass, it is always output
as the last page. Therefore, select the layout for the last page of your
original every time you place it.
●
In TWO-SIDED/1 TO 2 or TWO-SIDED/1 TO 4 copy modes, select
the front or back of the layout for the last original.
To select the layout order
