5-6
Mode Memory (Storing and Recalling Copy Settings)
Chapter 5 Storing/Recalling Copy Settings
Copier Operator’s Manual/Basic Operations
5
5
Select the desired key ([M1] to [M9]) for which
the name is to be entered.
MEMO:
●
When you select a key in which a copy job is already stored, its
settings are displayed. If there are more stored copy settings than
currently displayed, you can display other copy settings using the
[
▲
] [
▼
] keys.
●
Names can also be assigned to keys to which a copy mode has not
yet been assigned.
6
6
Press the [OK] key.
7
7
Enter a name, then press the [OK] key.
MEMO:
●
For details on how to enter characters, see the Reference Manual,
Entering Characters on the Touch Panel Display p. 2-8.
●
Up to eight characters can be entered. A single special character is
counted as two normal characters.
●
If the [OK] key is pressed without any characters entered, the key
name returns to the factory setting, e.g. [M1], [M2], etc.
8
8
Press the [OK] key.
