1-7
Parts and Their Functions
Copier Operator’s Manual/Basic Operations
Chapter 1 Introduction
Single Color
Press to select or cancel the
Single Color function. This
function enables you to make
copies in one specific color
(monochrome copies). You can
select one color from the seven
color types: red, magenta, yellow,
green, cyan, blue and black. (See
the Copier Operator’s Manual/
Advanced Operations, Single
Color p. 1-15.)
Color Balance
Press to select or cancel the Color Balance function. This function
enables you to adjust color tones by varying the relative strengths of
yellow, magenta, cyan and black. It is also possible to store and
recall the adjusted color tones. (See the Copier Operator’s Manual/
Advanced Operations, Color Balance p.1-2.)
One Touch Color
Press to select or cancel
the One Touch Color
function. This function
enables you to adjust the
copy image quality so that it
corresponds to the original
with just one touch of a key.
Six image qualities are
available, including Vivid
Colors, Lighten Image,
Highlight Reproduction, etc.
(See the Copier Operator’s
Manual/Advanced
Operations, One Touch
Color p.1-12.)
Framing/Blanking
Press to select or cancel the Framing or
Blanking function. This function enables you
to make copies only of designated areas on
the original, or to make copies excluding a
designated area on the original. (See the
Copier Operator’s Manual/Advanced
Operations, Framing p. 2-2.) (See the Copier
Operator’s Manual/Advanced Operations,
Blanking p. 2-14.)
Image Creation
Press to select or cancel the Image Creation function. This function enables you to
make copies by processing the original image. Four types are available: Nega/Posi,
Image Repeat, Mirror Image and Slanted Image.
(See the Copier Operators Manual/Advanced Operations, Nega/Posi p. 2-26
Image Repeat p. 2-28
Mirror Image p. 2-34
Slanted Image p. 2-40.)
Sharpness
Press to select or cancel the
Sharpness function. This function
enables you to enhance the edges
or to soften the contrast of the
images when making copies. (See
the Copier Operator’s Manual/
Advanced Operations, Sharpness
p. 2-46.)
Image Quality Adjustment
Press to select or cancel the Image
Quality Adjustment function or set
the Automatic Exposure Adjust-
ment. This function enables you to
make copies eliminating back-
ground color or eliminating image
shadow from the rear side of a two-
sided original. (See the Copier
Operator’s Manual/Advanced
Operations, Background Color
Adjustment p.1-18.) (See the
Copier Operator’s Manual/
Advanced Operations, 2nd Side
Elimination p. 1-22.)
