Canon Color imageRUNNER C5180 Series Service Manual Download

Page: 744 / 851

Chapter 19

19-99

PTJAM-RC

PDL jam recovery switch
Sets whether to perform recovery print when there is a jam in a PDL job.
Setting values
0: OFF (No recovery)
1: ON (Recovery)
[Factory settings and after RAM clear: 1]

SLP-SLCT

Use it to set the switch designed to switch between existing network-based applications.
A certain packet needs to be received as a condition for the machine to recover from sleep
mode via network. Because the existing network system applications (e.g., Net Spot
Accountant, image WARE) do not send such packet, the machine fails to recover via network
if it's shifted to sleep mode 3.
When setting '1', the machine able to recover from sleep mode via network because it does not
shift to sleep mode 3 (1wsleep), resulting the trade-off with the increase of consuming
electricity.
settings
0: do not use (default); 1: use
MEMO:
This is not used at normal servicing.

PS-MODE

Selecting compatibility mode when using PS (image processing, print specification)
This is the mode to simulate REPLACE to hold compatibility for image processing and print
specification.
settings
0: no use of PS compatibility mode (default)
1: image processing equivalent of iR2220/2800/3300 series (compatibility with existing
machines)
2: image processing equivalent of iR105 (compatibility with existing machine)
3: backup
4: landscape image and portrait image can be duplexed printing using Canon controller. This
is the compatible mode with non-Canon controller.
5 through 65535: backup
When the setting value is '1', the output will be equivalent to that of iR2200 / 2800 / 3300 series.
Whereas when the setting value is '2', the output will be equivalent to that of iR105 series.

CNCT-RLZ

Use it to enable/disable the connection serialization function.
Connection serialize function works to secure job grouping function of imageWARE Output
Manager Select Edition V1.0. Because MFP (such as iR machine) is able to gain multiple
connections, the job grouping function is secured by setting not to receive multiple connections
at host machine side. If setting '1', it is able to avoid rearrangement of jobs that the machine
does not execute job reception by other connections until the job data reception of a certain
connection completes.
settings
0: off (default) ; 1: on
MEMO:
Connection
- connection established among multiple hosts (e.g., PC) via network
Job grouping function
- imageWARE Output Manager Select Edition V1.0 to work not to let a job interruption from
other PC by group job (sending multiple jobs for 1 session when sending jobs)

2C-CT-SW

Colour counter (restricted to two colour mode) switch
In 2 colour mode, switches the incremental counter between full colour and mono-colour.
Setting values
0: Mono-colour counter
1: Full colour counter
[Factory settings and after RAM clear: 1]

Canon Color imageRUNNER C5180 Series, Service Manual

Search results

Summary of Contents for Color imageRUNNER C5180 Series

Reviews:

Related manuals for Color imageRUNNER C5180 Series

Brands by name

Popular brands