Canon Color iR Security Kit-A1P, Installation Manual

– 7 –

• Job Log Display

<Function>

Set whether or not to display the history of copying,

fax communication, and printing.

<Service Mode items>

COPIER > Option > USER > LGSW-DSP

<Setting range/Operation>

0: Do not display in User Mode (Default)

1: Display in User Mode

Change the set value from 0 to 1.

2) Once you have entered System Settings in User

Mode, the Hard Disk Data Complete Erase and Job

Log Display buttons. Set the buttons to ON or OFF

according to the user request.

3.3

After Work

1) Check the serial number of the copier and turn the

power off.

2) Remove the protect key device from PC.

3) Turn the PC power off.

4) Disconnect the cross Ethernet cable between the

copier and PC.

5) Connect the Ethernet cable, parallel cable, and

modular cable disconnected before work.

6) If the network connection of the copier has been

changed, reset the connection to the original set-

tings and turn the power off and on.

7) Enter the serial number of the copier into the en-

closed serial number label and stick the label to the

protect key device (parallel or USB).

Fig. 3-7

8) Put the protect key device in a conductive bag and

pass it to the user with the iR Series Security Sys-

tem Setup Tool CD-ROM.

Instruct the user to store them securely.