Run the thread through the square
hole and glue the trainer firmly in
place on the base.
With parts A and B in positioned as
illustrated below, insert both threads
through the slot on part 27 and lightly
take up the tension on both threads.
With both threads inserted into part 27,
gently turn the handle to move the trainer's
arms and confirm the movement of the horses.
Apply glue to part 27
and glue thread firmly
in place. Trim off any
dangling ends of thread.
Make
two sets.
(Moving) Performing white horses : Assembly Instructions
©
Canon Inc.
©
Hideharu Naitoh & G&P
