Canon CRL3124N Instruction Manual Download

Page: 265 / 468

265

With [

2: Movie rec. size

], you can

set the movie’s image size, frame rate
per second, and compression method.
The frame rate switches automatically
depending on the [

3: Video system

]

setting.

Image Size

[

1920x1080

] : Full High-Definition (Full HD) recording quality.

The aspect ratio will be 16:9.

[

1280x720

] : High-Definition (HD) recording quality. The

aspect ratio will be 16:9.

[

640x480

]

: Standard-definition recording quality. The aspect

ratio will be 4:3.

Frame Rate

(fps: frames per second)

: For areas where the TV format is NTSC (North America,

Japan, Korea, Mexico, etc.).

: For areas where the TV format is PAL (Europe, Russia,

China, Australia, etc.).

: Mainly for motion pictures.

Compression Method

IPB

: Compresses multiple frames at a time efficiently

for recording. Since the file size will be smaller
than with ALL-I, you can shoot longer.

ALL-I (I-only) : Compresses one frame at a time for recording.

Although the file size will be larger than with
IPB, the movie will be more suited for editing.

Setting the Movie Recording Size

Summary of Contents for CRL3124N





















































































































































































































































































































































































































































































Search results

Summary of Contents for CRL3124N

Reviews:

Related manuals for CRL3124N

Brands by name

Popular brands

Canon CRL3124N, Instruction Manual

Search results

Summary of Contents for CRL3124N

Reviews:

Related manuals for CRL3124N

Brands by name

Popular brands